19 Accessories
- Hide filter options
- Product Family
- Product Line
- Component Type
- Key Attributes
Joins main beam or cross tee to wall molding with no visible pop rivets.
Used to hang suspension system below existing 1-1/2" grid face, transferring weight directly to hanger wire - allows for double layer of 5/8" gypsum.
Used to hang suspension system below existing 15/16" grid face, transferring weight directly to hanger wire.
Used to create positive and secure angles for drywall and ceiling installations on either main beams or cross tees (attachment with 7/16" pan head screw).
Used to create positive and secure angles for drywall and ceiling installations on either main beams or cross tees (attachment with 7/16" pan head screw).
Facilitates transition from drywall-to-ACT ceiling - eliminates need for drywall bead.
For Ceramaguard panels and 5/8" drywall. Locks under bulb of grid section to prevent upward movement and provide secure attachment surface. Facilitates transition from drywall to acoustical ceiling; one-sided hold-down clip.
Facilitates transition from drywall-to-ACT ceiling - eliminates need for drywall bead.
Used to create positive and secure angles for drywall and ceiling installations on either main beams or cross tees (attachment with 7/16" pan head screw).
Allows for a “second” ceiling to be installed below a drywall ceiling - approved for use in UL Designs P237, P239, P240 and P241.
Used to space 2 parallel main beams for light fixtures and air diffusers - allows for 1/4" adjustments with 3 different clips.
Used to space 2 parallel main beams for light fixtures and air diffusers - allows for 1/4" adjustments with 3 different clips.
Used to space 2 parallel main beams for light fixtures and air diffusers - allows for 1/4" adjustments with 3 different clips.
Provides up to 8 points of IIC improvement to ensure your project meets IBC requirements.
Fastens drywall track to underside of exposed suspension system with lay-in panels, leaving suspension system face free of screw holes