Time, Material & Labor Savings Calculator

ShortSpan Calculations for Corridors and Small Rooms Less Than 14' Wide

Change Solution Type
* Note: All form fields are required. For help, click the on the question.

General Info

Room/Corridor Dimensions

X Remove Selected Rooms
Add Room/Corridor Add Another Room
Adding this room will exceed the 50 room limit.
You must add at least one room.

Traditional Labor Costs

Traditional Material Costs

Armstrong Corridor Calculations

For this input take the hourly rate x an 8 hour day. For example: $55/hr. x 8hrs. = $440.00 per person / per day
For this particular condition. How many sq. ft. of this condition could you expect to be installed in one (1) man day if you were using traditional framing?
What is your local market price per lineal foot that you would typically use to build this condition, if you were building it traditionally?
What is your local market price per lineal foot of the type of track that you would typically use to build this condition, if you were building it traditionally (ex. 3-5/8")?
How much would you say it costs you to install one (1): 9-12g hanger wire, clip, or stud shot. If you are in NYC - how much does it cost you to install one (1) CBS Clip hanger to black iron?
How much would you say it costs you to install one (1): 12g Hanger Wire?
What is your local market price per lineal foot that you would typically use to build this condition, if you were building it traditionally? NOTE: if Black Iron is not a part of you project just put $0.00 in the field.
What is your local market price per lineal foot that you would typically use to build this condition, if you were building it traditionally? NOTE: if Hat Channel is not a part of you project just put $0.00 in the field.
How much do you pay locally for an Armstrong ShortSpan Tee per lineal ft.?
How much do you pay locally for Armstrong StrongBack Support per lineal ft.?
How much do you pay locally for an Armstrong Locking Angle Molding (LAM) per lineal ft.?
How much do you pay locally for a Knurled Angle Molding (KAM) per lineal ft.?
Are you sure you want to remove the # room(s) selected?

NOTE: This estimating tool is for guidance to make more informed decisions to use our pre-engineered solutions over traditional construction methods. It is not meant for material quantity estimation. Productivity and labor rates vary per contractor/per installer/per market. These calculations are based on contractor feedback and our own installation comparison. Armstrong Ceilings is not liable for miscalculations.

RESOURCES

Who is my Distributor?
Find a Distributor

Need a Quick Answer?
Contact TechLine

Interested in On-Site Trainings?
Contact an Industry Expert

How do we Calculate Savings?
Learn More

Want a fast SIMPLESOFFIT Quote?
Learn More